64kHz

Switching frequency

480000rpm

Maximum speed

≤0.2%

Rotational speed accuracy
Product introduction
The TSD-BD series is a high-performance drive of vector control for high-speed motors that uses "5-generation motor control technology" to realize hardware acceleration by SoC FPGA with an output fundamental frequency of up to 8,000Hz and can drive a high-speed motor/spindle of 480,000 rpm. The motor can achieve high-performance sensorless vector control without encoder, which has the characteristics of high speed accuracy, fast dynamic response and no speed drop under load increase , which significantly improves the processing performance. At the same time, small current harmonics can also significantly reduce the temperature rise of the motor/spindle and ensure the safety of motor/spindle operation.
Basic parameters

name

TSD-BD

size 168*117*36.7mm

Input voltag

24VDC/48VDC/80VDC

Maximum output frequency

8000Hz

Output voltag

16VAC/33VAC/55VAC

Rated output powe

270VA/560VA/940VA

Mode of communicatio

Io/RS485/CAN is supported

Ambient temperature range

-20°C ~ 50°C, over 40 °C derating treatment


Product features

The TSD-BD series is a high-performance drive of vectore control for high-speed motors with an output fundamental frequency of up to 8000Hz and can drive a high-speed motor/spindle of 480,000 rpm. The motor can achieve high-performance sensorless vector control without encoder, which has the characteristics of high speed accuracy, fast dynamic response, and no speed drop under load increae, which significantly improves the processing performance. At the same time, small current harmonics can also significantly reduce the temperature rise of the motor/spindle and ensure the safety of motor/spindle operation.

The TSD-BD series has an input voltage range of 24V to 80VDC and can be powered by a switching power supply. The output voltage range is 16V~55VAC and the peak output power can reach 1140VA. This series of products has a variety of communication interfaces to meet the CANopen protocol of the CiA402 technical specifications. uUsers can use PLC, RS485, CAN and other communication interfaces to control and monitor the operating status of equipment.

TSD-BD series products have been widely used in PCB drilling and PCB cutting machines, denture cutting equipment, zirconia ceramic processing equipment, high-precision grinding machines, high-precision engraving and milling machines and other occasions that require the use of high-speed motor systems, which greatly improves the performance of customer processing products.


Message Board
Submit now